How much does a gate cost in Asheville, NC?
Single or double swing gate with anti-sag hardware. Priced against North Carolina material costs, a typical DIY gate in Asheville runs about $339 in materials — 4% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Asheville cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Asheville (DIY materials) | $288 | $339 | $458 |
| National average | $300 | $353 | $477 |
Priced from the North Carolina material index — 4% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $339. A contractor in the Asheville market (materials plus about 6 labor hours at ~$47/hr) estimates to $641–$860. Estimated DIY savings: $390 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements.
Outside city limits, Buncombe County is typically the permitting authority.
Get your exact Asheville price
The planner opens pre-filled with the same typical gate behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
How much does a gate cost in Asheville, NC?
Materials typically run $288–$458 for a common-size project using Asheville-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Asheville?
DIY materials estimate to about $339. A local contractor estimates to $641–$860 at the Asheville-area labor rate of roughly $47/hr, so DIY could save an estimated $390 (53%).
Do I need a permit for a gate in Asheville?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements. Buncombe County and the City of Asheville rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Asheville gate pricing different from the national average?
We apply a regional material cost index for the Asheville market — currently 4% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Asheville
Gate cost in nearby cities
Looking at the whole state? Gate cost in North Carolina.