How much does a gate cost in Winston Salem, NC?
Single or double swing gate with anti-sag hardware. Priced against North Carolina material costs, a typical DIY gate in Winston Salem runs about $326 in materials — 4% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Winston Salem cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Winston Salem (DIY materials) | $277 | $326 | $440 |
| National average | $289 | $340 | $459 |
Priced from the North Carolina material index — 4% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $326. A contractor in the Winston Salem market (materials plus about 6 labor hours at ~$47/hr) estimates to $617–$827. Estimated DIY savings: $375 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements.
Outside city limits, Forsyth County is typically the permitting authority.
Get your exact Winston Salem price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Winston Salem, NC?
Materials typically run $277–$440 for a common-size project using Winston Salem-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Winston Salem?
DIY materials estimate to about $326. A local contractor estimates to $617–$827 at the Winston Salem-area labor rate of roughly $47/hr, so DIY could save an estimated $375 (53%).
Do I need a permit for a gate in Winston Salem?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements. Forsyth County and the City of Winston Salem rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Winston Salem gate pricing different from the national average?
We apply a regional material cost index for the Winston Salem market — currently 4% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Winston Salem
Gate cost in nearby cities
Looking at the whole state? Gate cost in North Carolina.