How much does a gate cost in Greensboro, NC?
Single or double swing gate with anti-sag hardware. Priced against North Carolina material costs, a typical DIY gate in Greensboro runs about $339 in materials — 4% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Greensboro cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Greensboro (DIY materials) | $288 | $339 | $458 |
| National average | $300 | $353 | $477 |
Priced from the North Carolina material index — 4% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $339. A contractor in the Greensboro market (materials plus about 6 labor hours at ~$47/hr) estimates to $641–$860. Estimated DIY savings: $390 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements.
Outside city limits, Guilford County is typically the permitting authority.
Get your exact Greensboro price
The planner opens pre-filled with the same typical gate behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
How much does a gate cost in Greensboro, NC?
Materials typically run $288–$458 for a common-size project using Greensboro-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Greensboro?
DIY materials estimate to about $339. A local contractor estimates to $641–$860 at the Greensboro-area labor rate of roughly $47/hr, so DIY could save an estimated $390 (53%).
Do I need a permit for a gate in Greensboro?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements. Guilford County and the City of Greensboro rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Greensboro gate pricing different from the national average?
We apply a regional material cost index for the Greensboro market — currently 4% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Greensboro
Gate cost in nearby cities
Looking at the whole state? Gate cost in North Carolina.