How much does a gate cost in Durham, NC?
Single or double swing gate with anti-sag hardware. Priced against North Carolina material costs, a typical DIY gate in Durham runs about $326 in materials — 4% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Durham cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Durham (DIY materials) | $277 | $326 | $440 |
| National average | $289 | $340 | $459 |
Priced from the North Carolina material index — 4% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $326. A contractor in the Durham market (materials plus about 6 labor hours at ~$47/hr) estimates to $617–$827. Estimated DIY savings: $375 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements.
Outside city limits, Durham County is typically the permitting authority.
Get your exact Durham price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Durham, NC?
Materials typically run $277–$440 for a common-size project using Durham-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Durham?
DIY materials estimate to about $326. A local contractor estimates to $617–$827 at the Durham-area labor rate of roughly $47/hr, so DIY could save an estimated $375 (53%).
Do I need a permit for a gate in Durham?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements. Durham County and the City of Durham rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Durham gate pricing different from the national average?
We apply a regional material cost index for the Durham market — currently 4% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Durham
Gate cost in nearby cities
Looking at the whole state? Gate cost in North Carolina.