How much does a gate cost in Raleigh, NC?
Single or double swing gate with anti-sag hardware. Priced against North Carolina material costs, a typical DIY gate in Raleigh runs about $326 in materials — 4% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Raleigh cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Raleigh (DIY materials) | $277 | $326 | $440 |
| National average | $289 | $340 | $459 |
Priced from the North Carolina material index — 4% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $326. A contractor in the Raleigh market (materials plus about 6 labor hours at ~$47/hr) estimates to $617–$827. Estimated DIY savings: $375 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements.
Outside city limits, Wake County is typically the permitting authority.
Get your exact Raleigh price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Raleigh, NC?
Materials typically run $277–$440 for a common-size project using Raleigh-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Raleigh?
DIY materials estimate to about $326. A local contractor estimates to $617–$827 at the Raleigh-area labor rate of roughly $47/hr, so DIY could save an estimated $375 (53%).
Do I need a permit for a gate in Raleigh?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in North Carolina. Powered gates add electrical permit requirements. Wake County and the City of Raleigh rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Raleigh gate pricing different from the national average?
We apply a regional material cost index for the Raleigh market — currently 4% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Raleigh
Gate cost in nearby cities
Looking at the whole state? Gate cost in North Carolina.