How much does a gate cost in New York?
Single or double swing gate with anti-sag hardware. Using New York material pricing, a typical DIY gate runs about $391 in materials — 15% above the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
New York cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| New York (DIY materials) | $332 | $391 | $528 |
| National average | $289 | $340 | $459 |
New York material prices run about 15% above the national average based on our regional pricing index. Based on a common-size gate — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $391. Hiring a contractor in New York (materials + labor at ~$74/hr) estimates to $740–$992, roughly 5 labor hours. Estimated DIY savings: $450 (53%).
Get your exact New York price
Enter your dimensions for a precise materials list and cost — an estimate tailored to your build, not a generic average.
Frequently asked questions
Materials alone typically run $332–$528 in New York for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $391 versus an estimated contractor range of $740–$992 (materials plus labor at the regional rate of $74/hr). That's a potential estimated savings of $450 (53%) by doing it yourself.
Permit thresholds vary by project type and city. Check our New York permit lookup and build guide for the state-level rules before you start.
See our gate materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.