How much does a gate cost in Yonkers, NY?
Single or double swing gate with anti-sag hardware. Priced against New York material costs, a typical DIY gate in Yonkers runs about $391 in materials — 15% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Yonkers cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Yonkers (DIY materials) | $332 | $391 | $528 |
| National average | $289 | $340 | $459 |
Priced from the New York material index — 15% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $391. A contractor in the Yonkers market (materials plus about 5 labor hours at ~$74/hr) estimates to $740–$992. Estimated DIY savings: $450 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New York. Powered gates add electrical permit requirements.
Outside city limits, Westchester County is typically the permitting authority.
Get your exact Yonkers price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Yonkers, NY?
Materials typically run $332–$528 for a common-size project using Yonkers-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Yonkers?
DIY materials estimate to about $391. A local contractor estimates to $740–$992 at the Yonkers-area labor rate of roughly $74/hr, so DIY could save an estimated $450 (53%).
Do I need a permit for a gate in Yonkers?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New York. Powered gates add electrical permit requirements. Westchester County and the City of Yonkers rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Yonkers gate pricing different from the national average?
We apply a regional material cost index for the Yonkers market — currently 15% higher than the national average. Labor is indexed separately at about $74/hr for the contractor comparison.
Other projects in Yonkers
Gate cost in nearby cities
Looking at the whole state? Gate cost in New York.