How much does a gate cost in Staten Island, NY?
Single or double swing gate with anti-sag hardware. Priced against New York material costs, a typical DIY gate in Staten Island runs about $391 in materials — 15% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Staten Island cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Staten Island (DIY materials) | $332 | $391 | $528 |
| National average | $289 | $340 | $459 |
Priced from the New York material index — 15% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $391. A contractor in the Staten Island market (materials plus about 5 labor hours at ~$74/hr) estimates to $740–$992. Estimated DIY savings: $450 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New York. Powered gates add electrical permit requirements.
Outside city limits, Richmond County is typically the permitting authority.
Get your exact Staten Island price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Staten Island, NY?
Materials typically run $332–$528 for a common-size project using Staten Island-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Staten Island?
DIY materials estimate to about $391. A local contractor estimates to $740–$992 at the Staten Island-area labor rate of roughly $74/hr, so DIY could save an estimated $450 (53%).
Do I need a permit for a gate in Staten Island?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New York. Powered gates add electrical permit requirements. Richmond County and the City of Staten Island rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Staten Island gate pricing different from the national average?
We apply a regional material cost index for the Staten Island market — currently 15% higher than the national average. Labor is indexed separately at about $74/hr for the contractor comparison.
Other projects in Staten Island
Gate cost in nearby cities
Looking at the whole state? Gate cost in New York.