Roofing · materials & cut list
Roofing materials list & cut list
Shingle or metal re-roof with tear-off, dry-in and disposal. Below is the standard parts list and cut list for a typical roofing, generated by the same engine that powers our free calculator. Quantities scale with your dimensions — this is the baseline shopping list before you customize.
Estimates only — not a quote. Baseline total: $3,084
Materials list
| Item | Qty | Unit cost | Total |
|---|---|---|---|
| Architectural shingles | 43 bundle | $41 | $1,763 |
| Starter strip | 1 bundle | $48 | $48 |
| Hip & ridge cap | 2 bundle | $62 | $124 |
| Synthetic underlayment (10 sq roll) | 2 roll | $92 | $184 |
| Drip edge (10' stick) | 17 ea | $13 | $221 |
| Ridge vent (4' section) | 10 ea | $26 | $260 |
| Roofing nails (coil) | 2 box | $34 | $68 |
| Pipe boots / flashing | 3 ea | $14 | $42 |
| Ice & water shield (2 sq roll) | 2 roll | $118 | $236 |
| Tear-off disposal (1 layer) | 12.52 sq | $11 | $137.72 |
Cut list
| Part | Qty | Size | Note |
|---|---|---|---|
| Starter course | 1 | 80 lf along eaves | Overhang drip edge by 1/4–3/8". Never start with a full shingle. |
| Field courses | 34 | 5-5/8" exposure | Snap chalk lines every 5 courses to keep the pattern honest. |
| Ridge / hip cap | 40 | 40 lf | Cap last, working into the prevailing wind. |
Get quantities matched to your exact size
This list is a common-size baseline. Run the calculator with your dimensions for an exact materials list, cut list, and cost estimate.
Open roofing calculator