How much does a roofing cost in Alabama?
Shingle or metal re-roof with tear-off, dry-in and disposal. Using Alabama material pricing, a typical DIY roofing runs about $2,886 in materials — 6% below the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
Alabama cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Alabama (DIY materials) | $2,453 | $2,886 | $3,896 |
| National average | $2,610 | $3,071 | $4,146 |
Alabama material prices run about 6% below the national average based on our regional pricing index. Based on a common-size roofing — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $2,886. Hiring a contractor in Alabama (materials + labor at ~$44/hr) estimates to $5,841–$7,833, roughly 69 labor hours. Estimated DIY savings: $3,752 (57%).
Get your exact Alabama price
Enter your dimensions for a precise materials list and cost — an estimate tailored to your build, not a generic average.
Frequently asked questions
Materials alone typically run $2,453–$3,896 in Alabama for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $2,886 versus an estimated contractor range of $5,841–$7,833 (materials plus labor at the regional rate of $44/hr). That's a potential estimated savings of $3,752 (57%) by doing it yourself.
Permit thresholds vary by project type and city. Check our Alabama permit lookup and build guide for the state-level rules before you start.
See our roofing materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.