How much does a concrete slab cost in Pennsylvania?
Poured concrete pad with forms, gravel base, and rebar. Using Pennsylvania material pricing, a typical DIY concrete slab runs about $641 in materials — 4% above the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
Pennsylvania cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Pennsylvania (DIY materials) | $545 | $641 | $865 |
| National average | $524 | $616 | $832 |
Pennsylvania material prices run about 4% above the national average based on our regional pricing index. Based on a common-size concrete slab — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $641. Hiring a contractor in Pennsylvania (materials + labor at ~$60/hr) estimates to $1,608–$2,156, roughly 17 labor hours. Estimated DIY savings: $1,186 (65%).
Get your exact Pennsylvania price
The planner opens pre-filled with the same typical concrete slab behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
Materials alone typically run $545–$865 in Pennsylvania for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $641 versus an estimated contractor range of $1,608–$2,156 (materials plus labor at the regional rate of $60/hr). That's a potential estimated savings of $1,186 (65%) by doing it yourself.
Permit thresholds vary by project type and city. Check our Pennsylvania permit lookup and build guide for the state-level rules before you start.
See our concrete slab materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.