Concrete slab · materials & cut list
Concrete slab materials list & cut list
Poured concrete pad with forms, gravel base, and rebar. Below is the standard parts list and cut list for a typical concrete slab, generated by the same engine that powers our free calculator. Quantities scale with your dimensions — this is the baseline shopping list before you customize.
Estimates only — not a quote. Baseline total: $616
Materials list
| Item | Qty | Unit cost | Total |
|---|---|---|---|
| Ready-mix concrete (delivered) | 1.63 cu yd | $165 | $268.95 |
| Crushed gravel base | 1.63 cu yd | $40 | $65.2 |
| 6mil vapor barrier roll (10×25) | 1 roll | $55 | $55 |
| Form lumber (2×4 × 12') | 5 ea | $8 | $40 |
| Form stakes (wood, 24") | 15 ea | $2 | $30 |
| Foam expansion strip | 44 ft | $0.7 | $30.8 |
| Rebar #4 (16" grid) | 229 ft | $0.55 | $125.95 |
Cut list
| Part | Qty | Size | Note |
|---|---|---|---|
| Forms – long sides | 2 | 2×4 × 12' | Set to finished slab elevation, stake every 3ft, brace corners. |
| Forms – short sides | 2 | 2×4 × 10' | Butt into long sides; screw for easy removal after pour. |
| Rebar – long runs | 9 | #4 × 12' | Set on chairs at slab mid-depth (~2"). |
| Rebar – short runs | 10 | #4 × 10' | 16" spacing. Tie-wire at every intersection. |
Get quantities matched to your exact size
This list is a common-size baseline. Run the calculator with your dimensions for an exact materials list, cut list, and cost estimate.
Open concrete slab calculator