How much does a concrete slab cost in Maine?
Poured concrete pad with forms, gravel base, and rebar. Using Maine material pricing, a typical DIY concrete slab runs about $640 in materials — 4% above the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
Maine cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Maine (DIY materials) | $544 | $640 | $864 |
| National average | $524 | $616 | $832 |
Maine material prices run about 4% above the national average based on our regional pricing index. Based on a common-size concrete slab — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $640. Hiring a contractor in Maine (materials + labor at ~$54/hr) estimates to $1,605–$2,152, roughly 19 labor hours. Estimated DIY savings: $1,184 (65%).
Get your exact Maine price
Enter your dimensions for a precise materials list and cost — an estimate tailored to your build, not a generic average.
Frequently asked questions
Materials alone typically run $544–$864 in Maine for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $640 versus an estimated contractor range of $1,605–$2,152 (materials plus labor at the regional rate of $54/hr). That's a potential estimated savings of $1,184 (65%) by doing it yourself.
Permit thresholds vary by project type and city. Check our Maine permit lookup and build guide for the state-level rules before you start.
See our concrete slab materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.