How much does a gate cost in Washington, DC?
Single or double swing gate with anti-sag hardware. Priced against Washington, DC material costs, a typical DIY gate in Washington runs about $431 in materials — 22% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Washington cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Washington (DIY materials) | $366 | $431 | $582 |
| National average | $300 | $353 | $477 |
Priced from the Washington, DC material index — 22% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $431. A contractor in the Washington market (materials plus about 5 labor hours at ~$82/hr) estimates to $815–$1,093. Estimated DIY savings: $496 (53%).
Gates follow the same height limits as the fence they sit in — 7 ft back/side and 4 ft front is typical in District of Columbia. Powered gates add electrical permit requirements.
Get your exact Washington price
The planner opens pre-filled with the same typical gate behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
How much does a gate cost in Washington, DC?
Materials typically run $366–$582 for a common-size project using Washington-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Washington?
DIY materials estimate to about $431. A local contractor estimates to $815–$1,093 at the Washington-area labor rate of roughly $82/hr, so DIY could save an estimated $496 (53%).
Do I need a permit for a gate in Washington?
Gates follow the same height limits as the fence they sit in — 7 ft back/side and 4 ft front is typical in District of Columbia. Powered gates add electrical permit requirements. City of Washington rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Washington gate pricing different from the national average?
We apply a regional material cost index for the Washington market — currently 22% higher than the national average. Labor is indexed separately at about $82/hr for the contractor comparison.
Other projects in Washington
Gate cost in nearby cities
Looking at the whole state? Gate cost in District of Columbia.