How much does a gate cost in Fort Worth, TX?
Single or double swing gate with anti-sag hardware. Priced against Texas material costs, a typical DIY gate in Fort Worth runs about $330 in materials — 3% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Fort Worth cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Fort Worth (DIY materials) | $281 | $330 | $446 |
| National average | $289 | $340 | $459 |
Priced from the Texas material index — 3% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $330. A contractor in the Fort Worth market (materials plus about 6 labor hours at ~$48/hr) estimates to $624–$837. Estimated DIY savings: $380 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Texas. Powered gates add electrical permit requirements.
Outside city limits, Tarrant County is typically the permitting authority.
Get your exact Fort Worth price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Fort Worth, TX?
Materials typically run $281–$446 for a common-size project using Fort Worth-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Fort Worth?
DIY materials estimate to about $330. A local contractor estimates to $624–$837 at the Fort Worth-area labor rate of roughly $48/hr, so DIY could save an estimated $380 (53%).
Do I need a permit for a gate in Fort Worth?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Texas. Powered gates add electrical permit requirements. Tarrant County and the City of Fort Worth rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Fort Worth gate pricing different from the national average?
We apply a regional material cost index for the Fort Worth market — currently 3% lower than the national average. Labor is indexed separately at about $48/hr for the contractor comparison.
Other projects in Fort Worth
Gate cost in nearby cities
Looking at the whole state? Gate cost in Texas.