How much does a gate cost in Arlington, TX?
Single or double swing gate with anti-sag hardware. Priced against Texas material costs, a typical DIY gate in Arlington runs about $330 in materials — 3% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Arlington cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Arlington (DIY materials) | $281 | $330 | $446 |
| National average | $289 | $340 | $459 |
Priced from the Texas material index — 3% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $330. A contractor in the Arlington market (materials plus about 6 labor hours at ~$48/hr) estimates to $624–$837. Estimated DIY savings: $380 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Texas. Powered gates add electrical permit requirements.
Outside city limits, Tarrant County is typically the permitting authority.
Get your exact Arlington price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Arlington, TX?
Materials typically run $281–$446 for a common-size project using Arlington-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Arlington?
DIY materials estimate to about $330. A local contractor estimates to $624–$837 at the Arlington-area labor rate of roughly $48/hr, so DIY could save an estimated $380 (53%).
Do I need a permit for a gate in Arlington?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Texas. Powered gates add electrical permit requirements. Tarrant County and the City of Arlington rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Arlington gate pricing different from the national average?
We apply a regional material cost index for the Arlington market — currently 3% lower than the national average. Labor is indexed separately at about $48/hr for the contractor comparison.
Other projects in Arlington
Gate cost in nearby cities
Looking at the whole state? Gate cost in Texas.