How much does a gate cost in Tulsa, OK?
Single or double swing gate with anti-sag hardware. Priced against Oklahoma material costs, a typical DIY gate in Tulsa runs about $313 in materials — 8% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Tulsa cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Tulsa (DIY materials) | $266 | $313 | $423 |
| National average | $289 | $340 | $459 |
Priced from the Oklahoma material index — 8% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $313. A contractor in the Tulsa market (materials plus about 7 labor hours at ~$43/hr) estimates to $592–$794. Estimated DIY savings: $360 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Oklahoma. Powered gates add electrical permit requirements.
Outside city limits, Tulsa County is typically the permitting authority.
Get your exact Tulsa price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Tulsa, OK?
Materials typically run $266–$423 for a common-size project using Tulsa-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Tulsa?
DIY materials estimate to about $313. A local contractor estimates to $592–$794 at the Tulsa-area labor rate of roughly $43/hr, so DIY could save an estimated $360 (53%).
Do I need a permit for a gate in Tulsa?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Oklahoma. Powered gates add electrical permit requirements. Tulsa County and the City of Tulsa rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Tulsa gate pricing different from the national average?
We apply a regional material cost index for the Tulsa market — currently 8% lower than the national average. Labor is indexed separately at about $43/hr for the contractor comparison.
Other projects in Tulsa
Gate cost in nearby cities
Looking at the whole state? Gate cost in Oklahoma.