How much does a gate cost in Tampa, FL?
Single or double swing gate with anti-sag hardware. Priced against Florida material costs, a typical DIY gate in Tampa runs about $343 in materials — 1% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Tampa cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Tampa (DIY materials) | $292 | $343 | $463 |
| National average | $289 | $340 | $459 |
Priced from the Florida material index — 1% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $343. A contractor in the Tampa market (materials plus about 6 labor hours at ~$50/hr) estimates to $649–$870. Estimated DIY savings: $394 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Florida. Powered gates add electrical permit requirements.
Outside city limits, Hillsborough County is typically the permitting authority.
Get your exact Tampa price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Tampa, FL?
Materials typically run $292–$463 for a common-size project using Tampa-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Tampa?
DIY materials estimate to about $343. A local contractor estimates to $649–$870 at the Tampa-area labor rate of roughly $50/hr, so DIY could save an estimated $394 (53%).
Do I need a permit for a gate in Tampa?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Florida. Powered gates add electrical permit requirements. Hillsborough County and the City of Tampa rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Tampa gate pricing different from the national average?
We apply a regional material cost index for the Tampa market — currently 1% higher than the national average. Labor is indexed separately at about $50/hr for the contractor comparison.
Other projects in Tampa
Gate cost in nearby cities
Looking at the whole state? Gate cost in Florida.