How much does a gate cost in Florida?
Single or double swing gate with anti-sag hardware. Using Florida material pricing, a typical DIY gate runs about $357 in materials — 1% above the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
Florida cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Florida (DIY materials) | $303 | $357 | $482 |
| National average | $300 | $353 | $477 |
Florida material prices run about 1% above the national average based on our regional pricing index. Based on a common-size gate — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $357. Hiring a contractor in Florida (materials + labor at ~$50/hr) estimates to $675–$906, roughly 6 labor hours. Estimated DIY savings: $411 (53%).
Get your exact Florida price
The planner opens pre-filled with the same typical gate behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
Materials alone typically run $303–$482 in Florida for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $357 versus an estimated contractor range of $675–$906 (materials plus labor at the regional rate of $50/hr). That's a potential estimated savings of $411 (53%) by doing it yourself.
Permit thresholds vary by project type and city. Check our Florida permit lookup and build guide for the state-level rules before you start.
See our gate materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.