How much does a gate cost in Sioux Falls, SD?
Single or double swing gate with anti-sag hardware. Priced against South Dakota material costs, a typical DIY gate in Sioux Falls runs about $320 in materials — 6% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Sioux Falls cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Sioux Falls (DIY materials) | $272 | $320 | $432 |
| National average | $289 | $340 | $459 |
Priced from the South Dakota material index — 6% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $320. A contractor in the Sioux Falls market (materials plus about 6 labor hours at ~$47/hr) estimates to $605–$812. Estimated DIY savings: $368 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in South Dakota. Powered gates add electrical permit requirements.
Outside city limits, Minnehaha County is typically the permitting authority.
Get your exact Sioux Falls price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Sioux Falls, SD?
Materials typically run $272–$432 for a common-size project using Sioux Falls-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Sioux Falls?
DIY materials estimate to about $320. A local contractor estimates to $605–$812 at the Sioux Falls-area labor rate of roughly $47/hr, so DIY could save an estimated $368 (53%).
Do I need a permit for a gate in Sioux Falls?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in South Dakota. Powered gates add electrical permit requirements. Minnehaha County and the City of Sioux Falls rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Sioux Falls gate pricing different from the national average?
We apply a regional material cost index for the Sioux Falls market — currently 6% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Sioux Falls
Gate cost in nearby cities
Looking at the whole state? Gate cost in South Dakota.