How much does a gate cost in Rockville, MD?
Single or double swing gate with anti-sag hardware. Priced against Maryland material costs, a typical DIY gate in Rockville runs about $367 in materials — 8% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Rockville cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Rockville (DIY materials) | $312 | $367 | $495 |
| National average | $289 | $340 | $459 |
Priced from the Maryland material index — 8% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $367. A contractor in the Rockville market (materials plus about 5 labor hours at ~$63/hr) estimates to $694–$931. Estimated DIY savings: $422 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Maryland. Powered gates add electrical permit requirements.
Outside city limits, Montgomery County is typically the permitting authority.
Get your exact Rockville price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Rockville, MD?
Materials typically run $312–$495 for a common-size project using Rockville-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Rockville?
DIY materials estimate to about $367. A local contractor estimates to $694–$931 at the Rockville-area labor rate of roughly $63/hr, so DIY could save an estimated $422 (53%).
Do I need a permit for a gate in Rockville?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Maryland. Powered gates add electrical permit requirements. Montgomery County and the City of Rockville rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Rockville gate pricing different from the national average?
We apply a regional material cost index for the Rockville market — currently 8% higher than the national average. Labor is indexed separately at about $63/hr for the contractor comparison.
Other projects in Rockville
Gate cost in nearby cities
Looking at the whole state? Gate cost in Maryland.