How much does a gate cost in Idaho Falls, ID?
Single or double swing gate with anti-sag hardware. Priced against Idaho material costs, a typical DIY gate in Idaho Falls runs about $337 in materials — 1% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Idaho Falls cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Idaho Falls (DIY materials) | $286 | $337 | $455 |
| National average | $289 | $340 | $459 |
Priced from the Idaho material index — 1% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $337. A contractor in the Idaho Falls market (materials plus about 6 labor hours at ~$50/hr) estimates to $638–$855. Estimated DIY savings: $388 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Idaho. Powered gates add electrical permit requirements.
Outside city limits, Bonneville County is typically the permitting authority.
Get your exact Idaho Falls price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Idaho Falls, ID?
Materials typically run $286–$455 for a common-size project using Idaho Falls-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Idaho Falls?
DIY materials estimate to about $337. A local contractor estimates to $638–$855 at the Idaho Falls-area labor rate of roughly $50/hr, so DIY could save an estimated $388 (53%).
Do I need a permit for a gate in Idaho Falls?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Idaho. Powered gates add electrical permit requirements. Bonneville County and the City of Idaho Falls rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Idaho Falls gate pricing different from the national average?
We apply a regional material cost index for the Idaho Falls market — currently 1% lower than the national average. Labor is indexed separately at about $50/hr for the contractor comparison.
Other projects in Idaho Falls
Gate cost in nearby cities
Looking at the whole state? Gate cost in Idaho.