How much does a gate cost in Concord, NH?
Single or double swing gate with anti-sag hardware. Priced against New Hampshire material costs, a typical DIY gate in Concord runs about $374 in materials — 6% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Concord cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Concord (DIY materials) | $318 | $374 | $505 |
| National average | $300 | $353 | $477 |
Priced from the New Hampshire material index — 6% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $374. A contractor in the Concord market (materials plus about 6 labor hours at ~$57/hr) estimates to $708–$949. Estimated DIY savings: $430 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New Hampshire. Powered gates add electrical permit requirements.
Outside city limits, Merrimack County is typically the permitting authority.
Get your exact Concord price
The planner opens pre-filled with the same typical gate behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
How much does a gate cost in Concord, NH?
Materials typically run $318–$505 for a common-size project using Concord-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Concord?
DIY materials estimate to about $374. A local contractor estimates to $708–$949 at the Concord-area labor rate of roughly $57/hr, so DIY could save an estimated $430 (53%).
Do I need a permit for a gate in Concord?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New Hampshire. Powered gates add electrical permit requirements. Merrimack County and the City of Concord rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Concord gate pricing different from the national average?
We apply a regional material cost index for the Concord market — currently 6% higher than the national average. Labor is indexed separately at about $57/hr for the contractor comparison.
Other projects in Concord
Gate cost in nearby cities
Looking at the whole state? Gate cost in New Hampshire.