How much does a gate cost in Billings, MT?
Single or double swing gate with anti-sag hardware. Priced against Montana material costs, a typical DIY gate in Billings runs about $343 in materials — 1% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Billings cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Billings (DIY materials) | $292 | $343 | $463 |
| National average | $289 | $340 | $459 |
Priced from the Montana material index — 1% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $343. A contractor in the Billings market (materials plus about 6 labor hours at ~$50/hr) estimates to $649–$870. Estimated DIY savings: $394 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Montana. Powered gates add electrical permit requirements.
Outside city limits, Yellowstone County is typically the permitting authority.
Get your exact Billings price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Billings, MT?
Materials typically run $292–$463 for a common-size project using Billings-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Billings?
DIY materials estimate to about $343. A local contractor estimates to $649–$870 at the Billings-area labor rate of roughly $50/hr, so DIY could save an estimated $394 (53%).
Do I need a permit for a gate in Billings?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Montana. Powered gates add electrical permit requirements. Yellowstone County and the City of Billings rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Billings gate pricing different from the national average?
We apply a regional material cost index for the Billings market — currently 1% higher than the national average. Labor is indexed separately at about $50/hr for the contractor comparison.
Other projects in Billings
Gate cost in nearby cities
Looking at the whole state? Gate cost in Montana.