How much does a gate cost in Albuquerque, NM?
Single or double swing gate with anti-sag hardware. Priced against New Mexico material costs, a typical DIY gate in Albuquerque runs about $333 in materials — 2% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Albuquerque cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Albuquerque (DIY materials) | $283 | $333 | $450 |
| National average | $289 | $340 | $459 |
Priced from the New Mexico material index — 2% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $333. A contractor in the Albuquerque market (materials plus about 6 labor hours at ~$47/hr) estimates to $630–$845. Estimated DIY savings: $383 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New Mexico. Powered gates add electrical permit requirements.
Outside city limits, Bernalillo County is typically the permitting authority.
Get your exact Albuquerque price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Albuquerque, NM?
Materials typically run $283–$450 for a common-size project using Albuquerque-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Albuquerque?
DIY materials estimate to about $333. A local contractor estimates to $630–$845 at the Albuquerque-area labor rate of roughly $47/hr, so DIY could save an estimated $383 (53%).
Do I need a permit for a gate in Albuquerque?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New Mexico. Powered gates add electrical permit requirements. Bernalillo County and the City of Albuquerque rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Albuquerque gate pricing different from the national average?
We apply a regional material cost index for the Albuquerque market — currently 2% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Albuquerque
Gate cost in nearby cities
Looking at the whole state? Gate cost in New Mexico.