How much does a drywall & paint cost in South Dakota?
Hang, tape, finish and paint a room from bare studs. Using South Dakota material pricing, a typical DIY drywall & paint runs about $641 in materials — 6% below the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
South Dakota cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| South Dakota (DIY materials) | $545 | $641 | $865 |
| National average | $580 | $682 | $921 |
South Dakota material prices run about 6% below the national average based on our regional pricing index. Based on a common-size drywall & paint — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $641. Hiring a contractor in South Dakota (materials + labor at ~$47/hr) estimates to $1,664–$2,231, roughly 23 labor hours. Estimated DIY savings: $1,250 (66%).
Get your exact South Dakota price
Enter your dimensions for a precise materials list and cost — an estimate tailored to your build, not a generic average.
Frequently asked questions
Materials alone typically run $545–$865 in South Dakota for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $641 versus an estimated contractor range of $1,664–$2,231 (materials plus labor at the regional rate of $47/hr). That's a potential estimated savings of $1,250 (66%) by doing it yourself.
Permit thresholds vary by project type and city. Check our South Dakota permit lookup and build guide for the state-level rules before you start.
See our drywall & paint materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.