Skip to main content
Permit rules
Drywall & paint · materials & cut list

Drywall & paint materials list & cut list

Hang, tape, finish and paint a room from bare studs. Below is the standard parts list and cut list for a typical drywall & paint, generated by the same engine that powers our free calculator. Quantities scale with your dimensions — this is the baseline shopping list before you customize.

Estimates only — not a quote. Baseline total: $682

Materials list
ItemQtyUnit costTotal
Drywall 4×12' 1/2"13 sheet$23.5$305.5
Joint compound (level 4 finish)2 box$19$38
Paper joint tape (250')2 roll$6.5$13
Drywall screws 1-1/4" (5lb)1 box$24$24
Metal corner bead (8')5 ea$7.5$37.5
Sanding screens / paper2 pack$12$24
Drywall primer / sealer2 gal$26$52
Finish paint (2 coats)4 gal$44$176
Paintable caulk2 tube$6$12
Cut list
PartQtySizeNote
Wall sheets94×12'Hang horizontally, stagger the butt joints, and never land a joint on a door corner.
Ceiling sheets44×12'Ceiling first, perpendicular to the joists. Rent a panel lift — it pays for itself in one room.
Corner bead58' sticksCut to 8' for door returns.
Per-wall sheet estimate4~3 sheets/wallUse this to plan how many sheets to carry into the room at once.

Get quantities matched to your exact size

This list is a common-size baseline. Run the calculator with your dimensions for an exact materials list, cut list, and cost estimate.

Open drywall & paint calculator

Keep planning