How much does a drywall & paint cost in Greenville, SC?
Hang, tape, finish and paint a room from bare studs. Priced against South Carolina material costs, a typical DIY drywall & paint in Greenville runs about $648 in materials — 5% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Greenville cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Greenville (DIY materials) | $551 | $648 | $875 |
| National average | $580 | $682 | $921 |
Priced from the South Carolina material index — 5% below the national average. Based on a common-size drywall & paint; enter your own dimensions for an exact number.
DIY materials estimate: $648. A contractor in the Greenville market (materials plus about 24 labor hours at ~$45/hr) estimates to $1,682–$2,256. Estimated DIY savings: $1,264 (66%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Greenville County is typically the permitting authority.
Get your exact Greenville price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a drywall & paint cost in Greenville, SC?
Materials typically run $551–$875 for a common-size project using Greenville-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Greenville?
DIY materials estimate to about $648. A local contractor estimates to $1,682–$2,256 at the Greenville-area labor rate of roughly $45/hr, so DIY could save an estimated $1,264 (66%).
Do I need a permit for a drywall & paint in Greenville?
Permit thresholds vary by project. Check with the local building department before you start. Greenville County and the City of Greenville rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Greenville drywall & paint pricing different from the national average?
We apply a regional material cost index for the Greenville market — currently 5% lower than the national average. Labor is indexed separately at about $45/hr for the contractor comparison.
Other projects in Greenville
Drywall & paint cost in nearby cities
Looking at the whole state? Drywall & paint cost in South Carolina.