How much does a drywall & paint cost in Columbia, SC?
Hang, tape, finish and paint a room from bare studs. Priced against South Carolina material costs, a typical DIY drywall & paint in Columbia runs about $648 in materials — 5% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Columbia cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Columbia (DIY materials) | $551 | $648 | $875 |
| National average | $580 | $682 | $921 |
Priced from the South Carolina material index — 5% below the national average. Based on a common-size drywall & paint; enter your own dimensions for an exact number.
DIY materials estimate: $648. A contractor in the Columbia market (materials plus about 24 labor hours at ~$45/hr) estimates to $1,682–$2,256. Estimated DIY savings: $1,264 (66%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Richland County is typically the permitting authority.
Get your exact Columbia price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a drywall & paint cost in Columbia, SC?
Materials typically run $551–$875 for a common-size project using Columbia-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Columbia?
DIY materials estimate to about $648. A local contractor estimates to $1,682–$2,256 at the Columbia-area labor rate of roughly $45/hr, so DIY could save an estimated $1,264 (66%).
Do I need a permit for a drywall & paint in Columbia?
Permit thresholds vary by project. Check with the local building department before you start. Richland County and the City of Columbia rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Columbia drywall & paint pricing different from the national average?
We apply a regional material cost index for the Columbia market — currently 5% lower than the national average. Labor is indexed separately at about $45/hr for the contractor comparison.
Other projects in Columbia
Drywall & paint cost in nearby cities
Looking at the whole state? Drywall & paint cost in South Carolina.