How much does a drywall & paint cost in Florida?
Hang, tape, finish and paint a room from bare studs. Using Florida material pricing, a typical DIY drywall & paint runs about $689 in materials — 1% above the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
Florida cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Florida (DIY materials) | $586 | $689 | $930 |
| National average | $580 | $682 | $921 |
Florida material prices run about 1% above the national average based on our regional pricing index. Based on a common-size drywall & paint — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $689. Hiring a contractor in Florida (materials + labor at ~$50/hr) estimates to $1,789–$2,398, roughly 23 labor hours. Estimated DIY savings: $1,344 (66%).
Get your exact Florida price
Enter your dimensions for a precise materials list and cost — an estimate tailored to your build, not a generic average.
Frequently asked questions
Materials alone typically run $586–$930 in Florida for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $689 versus an estimated contractor range of $1,789–$2,398 (materials plus labor at the regional rate of $50/hr). That's a potential estimated savings of $1,344 (66%) by doing it yourself.
Permit thresholds vary by project type and city. Check our Florida permit lookup and build guide for the state-level rules before you start.
See our drywall & paint materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.