How much does a drywall & paint cost in District of Columbia?
Hang, tape, finish and paint a room from bare studs. Using District of Columbia material pricing, a typical DIY drywall & paint runs about $832 in materials — 22% above the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
District of Columbia cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| District of Columbia (DIY materials) | $707 | $832 | $1,123 |
| National average | $580 | $682 | $921 |
District of Columbia material prices run about 22% above the national average based on our regional pricing index. Based on a common-size drywall & paint — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $832. Hiring a contractor in District of Columbia (materials + labor at ~$82/hr) estimates to $2,160–$2,896, roughly 17 labor hours. Estimated DIY savings: $1,622 (66%).
Get your exact District of Columbia price
Enter your dimensions for a precise materials list and cost — an estimate tailored to your build, not a generic average.
Frequently asked questions
Materials alone typically run $707–$1,123 in District of Columbia for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $832 versus an estimated contractor range of $2,160–$2,896 (materials plus labor at the regional rate of $82/hr). That's a potential estimated savings of $1,622 (66%) by doing it yourself.
Permit thresholds vary by project type and city. Check our District of Columbia permit lookup and build guide for the state-level rules before you start.
See our drywall & paint materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.