Wall framing calculator: studs, plates, headers and sheathing
Framing takeoffs fail at the openings. Every door and window removes studs and adds a header, king studs, jacks, cripples and often blocking — and hand counts almost always miss one of those categories on at least one opening.
Enter each wall run with its length, height, stud spacing and openings, and the takeoff returns studs, plates, headers sized to opening width, cripples, blocking, sheathing and fasteners, with a cut list organized by wall so crews can build in sequence.
Estimates only — not a quote.
Open the wall framing calculatorIncluded in the takeoff
- Stud count per wall at your spacing
- Top and bottom plate lineal footage
- Header, king, jack and cripple counts per opening
- Sheathing sheets and fasteners
- Cut list grouped by wall run
Inputs
- Wall lengths and heights
- Stud spacing (16 or 24 inch centers)
- Opening widths and heights
- Interior or exterior, plate count and sheathing type
Plan it in 5 steps
- 1List walls separately
Enter each run on its own. Combined totals hide the plate breaks and corner studs you actually have to buy.
- 2Set spacing per wall
Interior partitions often run 24-inch centers where exterior walls run 16. Set them independently.
- 3Enter every opening
Header size follows opening width. Missing one opening understates lumber and misses the header entirely.
- 4Add corners and intersections
Corner and partition-intersection framing is real material. The takeoff accounts for it so you are not short at layout.
- 5Sequence the cut list
Build wall by wall from the grouped cut list so crews stack plates and studs in the order they are raised.
Planning guidance only. Every quantity and price is an estimate — confirm dimensions and local requirements before you buy or build.
Run your own numbers
Enter your dimensions and get a material list, cut list and regional cost estimate in a couple of minutes. No account needed to see the takeoff.
Start estimatingBidding wall framing calculator work for clients?
Contractors and handymen run this wall framing calculator to build the material takeoff, nest the cut list, check permits by ZIP and hand the client a branded proposal — same visit, before the estimate goes cold.
- Takeoff priced to your ZIP in minutes
- Cut list that trims the lumber order
- Branded proposal and invoice PDFs
Material and cost output is an estimate, never a quote. Permit content is guidance to verify with your local building department.
Frequently asked questions
Related pricing and planning pages
Other calculators
Not sure where to start? Browse every calculator