Concrete flatwork · materials & cut list
Concrete flatwork materials list & cut list
Driveways, walks, aprons and steps with joints and finish. Below is the standard parts list and cut list for a typical concrete flatwork, generated by the same engine that powers our free calculator. Quantities scale with your dimensions — this is the baseline shopping list before you customize.
Estimates only — not a quote. Baseline total: $2,872
Materials list
| Item | Qty | Unit cost | Total |
|---|---|---|---|
| Ready-mix concrete (delivered) | 8.86 cu yd | $172 | $1,523.92 |
| Compacted gravel base (3/4"-minus) | 9.78 cu yd | $42 | $410.76 |
| Form lumber (2×6 × 12') | 10 ea | $13 | $130 |
| Form stakes | 42 ea | $2 | $84 |
| Expansion joint material | 104 ft | $0.7 | $72.8 |
| Finishing tools (float, edger, groover, broom) | 1 kit | $78 | $78 |
| Rebar #4 (18" grid) | 766 ft | $0.55 | $421.3 |
| Joint sealant (saw-cut joints) | 76 ft | $1.1 | $83.6 |
| Concrete sealer (broom finish) | 2 gal | $34 | $68 |
Cut list
| Part | Qty | Size | Note |
|---|---|---|---|
| Forms – long sides | 2 | 2×6 × 40' | Stake every 2.5ft. Crown the forms so the pour drains away from the house at 1/8" per foot. |
| Forms – ends | 2 | 2×6 × 12' | Screw the corners so forms strip clean the next day. |
| Control joints | 4 | 11' panels | Cut or tool joints 1/4 of the slab depth (1.3") within 6–12 hours of the pour. |
| Rebar – long runs | 9 | #4 × 40' | On chairs at slab mid-depth. Overlap splices 20 bar diameters (~10"). |
| Rebar – short runs | 28 | #4 × 12' | 18" grid, tie-wired at intersections. |
Get quantities matched to your exact size
This list is a common-size baseline. Run the calculator with your dimensions for an exact materials list, cut list, and cost estimate.
Open concrete flatwork calculator