Skip to main content
Permit rules
Chicken coop · materials & cut list

Chicken coop materials list & cut list

Small coop with attached predator-proof run. Below is the standard parts list and cut list for a typical chicken coop, generated by the same engine that powers our free calculator. Quantities scale with your dimensions — this is the baseline shopping list before you customize.

Estimates only — not a quote. Baseline total: $1,711

Materials list
ItemQtyUnit costTotal
Foundation skids (PT 4×4 × 8')2 ea$28$56
Floor joists (PT 2×6 × 8')7 ea$18$126
Floor deck (3/4" PT plywood)2 ea$42$84
Wall studs (2×4 × 8')26 ea$6$156
Plates (2×4 × 12')6 ea$8$48
Sheathing (7/16" OSB 4×8)5 ea$28$140
Siding (t1-11 4×8)5 ea$48$240
Metal roof panels (3×10)3 ea$55$165
Nest boxes (pre-built)1 ea$45$45
Roost bar (2×2 × 8')1 ea$8$8
Coop pop door + hardware1 ea$90$90
Run posts (PT 4×4 × 8')7 ea$22$154
Concrete for run posts (50lb)14 bag$6.5$91
1/2" hardware cloth (4×25 roll)4 roll$65$260
Fasteners (nails, screws, staples)4 lb$12$48
Cut list
PartQtySizeNote
Skids24×4 × 6'Set on level gravel pad.
Floor joists72×6 × 4'16" on-center.
Wall studs262×4 × 5'16" on-center; build walls flat then tilt up.
Run posts74×4 × 8'Set 24" in ground on concrete. 7 posts around 10×6ft run.
Roost bar12×2 × 4'12" off the floor, at least 18" from walls. Round the top edges.

Get quantities matched to your exact size

This list is a common-size baseline. Run the calculator with your dimensions for an exact materials list, cut list, and cost estimate.

Open chicken coop calculator

Keep planning