How much does a gate cost in Massachusetts?
Single or double swing gate with anti-sag hardware. Using Massachusetts material pricing, a typical DIY gate runs about $394 in materials — 16% above the national average. These are estimates only, built from our live calculator's default project size — plug in your exact dimensions for a precise shopping list.
Estimates only — not a quote.
Massachusetts cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Massachusetts (DIY materials) | $335 | $394 | $532 |
| National average | $289 | $340 | $459 |
Massachusetts material prices run about 16% above the national average based on our regional pricing index. Based on a common-size gate — enter your own dimensions in the calculator for an exact number.
DIY materials estimate: $394. Hiring a contractor in Massachusetts (materials + labor at ~$75/hr) estimates to $745–$1,000, roughly 5 labor hours. Estimated DIY savings: $453 (53%).
Get your exact Massachusetts price
Enter your dimensions for a precise materials list and cost — an estimate tailored to your build, not a generic average.
Frequently asked questions
Materials alone typically run $335–$532 in Massachusetts for a common-size project, based on current regional material pricing. This is an estimate, not a quote — use our free calculator for numbers matched to your exact dimensions.
DIY materials run about $394 versus an estimated contractor range of $745–$1,000 (materials plus labor at the regional rate of $75/hr). That's a potential estimated savings of $453 (53%) by doing it yourself.
Permit thresholds vary by project type and city. Check our Massachusetts permit lookup and build guide for the state-level rules before you start.
See our gate materials and cut list page for the canonical parts list, then run the calculator with your dimensions for an exact quantity and cost breakdown.