How much does a gate cost in Spokane, WA?
Single or double swing gate with anti-sag hardware. Priced against Washington material costs, a typical DIY gate in Spokane runs about $385 in materials — 9% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Spokane cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Spokane (DIY materials) | $327 | $385 | $520 |
| National average | $300 | $353 | $477 |
Priced from the Washington material index — 9% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $385. A contractor in the Spokane market (materials plus about 5 labor hours at ~$66/hr) estimates to $728–$977. Estimated DIY savings: $443 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Washington. Powered gates add electrical permit requirements.
Outside city limits, Spokane County is typically the permitting authority.
Get your exact Spokane price
The planner opens pre-filled with the same typical gate behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
How much does a gate cost in Spokane, WA?
Materials typically run $327–$520 for a common-size project using Spokane-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Spokane?
DIY materials estimate to about $385. A local contractor estimates to $728–$977 at the Spokane-area labor rate of roughly $66/hr, so DIY could save an estimated $443 (53%).
Do I need a permit for a gate in Spokane?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Washington. Powered gates add electrical permit requirements. Spokane County and the City of Spokane rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Spokane gate pricing different from the national average?
We apply a regional material cost index for the Spokane market — currently 9% higher than the national average. Labor is indexed separately at about $66/hr for the contractor comparison.
Other projects in Spokane
Gate cost in nearby cities
Looking at the whole state? Gate cost in Washington.