How much does a gate cost in Saint Paul, MN?
Single or double swing gate with anti-sag hardware. Priced against Minneapolis, MN material costs, a typical DIY gate in Saint Paul runs about $364 in materials — 7% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Saint Paul cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Saint Paul (DIY materials) | $309 | $364 | $491 |
| National average | $289 | $340 | $459 |
Priced from the Minneapolis, MN material index — 7% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $364. A contractor in the Saint Paul market (materials plus about 5 labor hours at ~$66/hr) estimates to $689–$923. Estimated DIY savings: $419 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Minnesota. Powered gates add electrical permit requirements.
Outside city limits, Ramsey County is typically the permitting authority.
Get your exact Saint Paul price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Saint Paul, MN?
Materials typically run $309–$491 for a common-size project using Saint Paul-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Saint Paul?
DIY materials estimate to about $364. A local contractor estimates to $689–$923 at the Saint Paul-area labor rate of roughly $66/hr, so DIY could save an estimated $419 (53%).
Do I need a permit for a gate in Saint Paul?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Minnesota. Powered gates add electrical permit requirements. Ramsey County and the City of Saint Paul rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Saint Paul gate pricing different from the national average?
We apply a regional material cost index for the Saint Paul market — currently 7% higher than the national average. Labor is indexed separately at about $66/hr for the contractor comparison.
Other projects in Saint Paul
Gate cost in nearby cities
Looking at the whole state? Gate cost in Minnesota.