How much does a gate cost in Philadelphia, PA?
Single or double swing gate with anti-sag hardware. Priced against Philadelphia, PA material costs, a typical DIY gate in Philadelphia runs about $377 in materials — 11% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Philadelphia cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Philadelphia (DIY materials) | $320 | $377 | $509 |
| National average | $289 | $340 | $459 |
Priced from the Philadelphia, PA material index — 11% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $377. A contractor in the Philadelphia market (materials plus about 5 labor hours at ~$68/hr) estimates to $713–$956. Estimated DIY savings: $434 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Pennsylvania. Powered gates add electrical permit requirements.
Outside city limits, Philadelphia County is typically the permitting authority.
Get your exact Philadelphia price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Philadelphia, PA?
Materials typically run $320–$509 for a common-size project using Philadelphia-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Philadelphia?
DIY materials estimate to about $377. A local contractor estimates to $713–$956 at the Philadelphia-area labor rate of roughly $68/hr, so DIY could save an estimated $434 (53%).
Do I need a permit for a gate in Philadelphia?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Pennsylvania. Powered gates add electrical permit requirements. Philadelphia County and the City of Philadelphia rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Philadelphia gate pricing different from the national average?
We apply a regional material cost index for the Philadelphia market — currently 11% higher than the national average. Labor is indexed separately at about $68/hr for the contractor comparison.
Other projects in Philadelphia
Gate cost in nearby cities
Looking at the whole state? Gate cost in Pennsylvania.