How much does a gate cost in Jersey City, NJ?
Single or double swing gate with anti-sag hardware. Priced against New Jersey material costs, a typical DIY gate in Jersey City runs about $388 in materials — 14% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Jersey City cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Jersey City (DIY materials) | $330 | $388 | $524 |
| National average | $289 | $340 | $459 |
Priced from the New Jersey material index — 14% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $388. A contractor in the Jersey City market (materials plus about 5 labor hours at ~$72/hr) estimates to $734–$984. Estimated DIY savings: $446 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New Jersey. Powered gates add electrical permit requirements.
Outside city limits, Hudson County is typically the permitting authority.
Get your exact Jersey City price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Jersey City, NJ?
Materials typically run $330–$524 for a common-size project using Jersey City-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Jersey City?
DIY materials estimate to about $388. A local contractor estimates to $734–$984 at the Jersey City-area labor rate of roughly $72/hr, so DIY could save an estimated $446 (53%).
Do I need a permit for a gate in Jersey City?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in New Jersey. Powered gates add electrical permit requirements. Hudson County and the City of Jersey City rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Jersey City gate pricing different from the national average?
We apply a regional material cost index for the Jersey City market — currently 14% higher than the national average. Labor is indexed separately at about $72/hr for the contractor comparison.
Other projects in Jersey City
Gate cost in nearby cities
Looking at the whole state? Gate cost in New Jersey.