How much does a gate cost in Greenville, SC?
Single or double swing gate with anti-sag hardware. Priced against South Carolina material costs, a typical DIY gate in Greenville runs about $323 in materials — 5% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Greenville cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Greenville (DIY materials) | $275 | $323 | $436 |
| National average | $289 | $340 | $459 |
Priced from the South Carolina material index — 5% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $323. A contractor in the Greenville market (materials plus about 6 labor hours at ~$45/hr) estimates to $611–$819. Estimated DIY savings: $371 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in South Carolina. Powered gates add electrical permit requirements.
Outside city limits, Greenville County is typically the permitting authority.
Get your exact Greenville price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Greenville, SC?
Materials typically run $275–$436 for a common-size project using Greenville-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Greenville?
DIY materials estimate to about $323. A local contractor estimates to $611–$819 at the Greenville-area labor rate of roughly $45/hr, so DIY could save an estimated $371 (53%).
Do I need a permit for a gate in Greenville?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in South Carolina. Powered gates add electrical permit requirements. Greenville County and the City of Greenville rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Greenville gate pricing different from the national average?
We apply a regional material cost index for the Greenville market — currently 5% lower than the national average. Labor is indexed separately at about $45/hr for the contractor comparison.
Other projects in Greenville
Gate cost in nearby cities
Looking at the whole state? Gate cost in South Carolina.