How much does a gate cost in Columbus, OH?
Single or double swing gate with anti-sag hardware. Priced against Ohio material costs, a typical DIY gate in Columbus runs about $339 in materials — 4% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Columbus cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Columbus (DIY materials) | $288 | $339 | $458 |
| National average | $300 | $353 | $477 |
Priced from the Ohio material index — 4% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $339. A contractor in the Columbus market (materials plus about 6 labor hours at ~$54/hr) estimates to $641–$860. Estimated DIY savings: $390 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Ohio. Powered gates add electrical permit requirements.
Outside city limits, Franklin County is typically the permitting authority.
Get your exact Columbus price
The planner opens pre-filled with the same typical gate behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
How much does a gate cost in Columbus, OH?
Materials typically run $288–$458 for a common-size project using Columbus-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Columbus?
DIY materials estimate to about $339. A local contractor estimates to $641–$860 at the Columbus-area labor rate of roughly $54/hr, so DIY could save an estimated $390 (53%).
Do I need a permit for a gate in Columbus?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Ohio. Powered gates add electrical permit requirements. Franklin County and the City of Columbus rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Columbus gate pricing different from the national average?
We apply a regional material cost index for the Columbus market — currently 4% lower than the national average. Labor is indexed separately at about $54/hr for the contractor comparison.
Other projects in Columbus
Gate cost in nearby cities
Looking at the whole state? Gate cost in Ohio.