How much does a gate cost in Colorado Springs, CO?
Single or double swing gate with anti-sag hardware. Priced against Colorado material costs, a typical DIY gate in Colorado Springs runs about $357 in materials — 5% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Colorado Springs cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Colorado Springs (DIY materials) | $303 | $357 | $482 |
| National average | $289 | $340 | $459 |
Priced from the Colorado material index — 5% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $357. A contractor in the Colorado Springs market (materials plus about 5 labor hours at ~$60/hr) estimates to $675–$906. Estimated DIY savings: $411 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Colorado. Powered gates add electrical permit requirements.
Outside city limits, El Paso County is typically the permitting authority.
Get your exact Colorado Springs price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Colorado Springs, CO?
Materials typically run $303–$482 for a common-size project using Colorado Springs-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Colorado Springs?
DIY materials estimate to about $357. A local contractor estimates to $675–$906 at the Colorado Springs-area labor rate of roughly $60/hr, so DIY could save an estimated $411 (53%).
Do I need a permit for a gate in Colorado Springs?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Colorado. Powered gates add electrical permit requirements. El Paso County and the City of Colorado Springs rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Colorado Springs gate pricing different from the national average?
We apply a regional material cost index for the Colorado Springs market — currently 5% higher than the national average. Labor is indexed separately at about $60/hr for the contractor comparison.
Other projects in Colorado Springs
Gate cost in nearby cities
Looking at the whole state? Gate cost in Colorado.