How much does a gate cost in Clarksville, TN?
Single or double swing gate with anti-sag hardware. Priced against Tennessee material costs, a typical DIY gate in Clarksville runs about $320 in materials — 6% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Clarksville cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Clarksville (DIY materials) | $272 | $320 | $432 |
| National average | $289 | $340 | $459 |
Priced from the Tennessee material index — 6% below the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $320. A contractor in the Clarksville market (materials plus about 6 labor hours at ~$46/hr) estimates to $605–$812. Estimated DIY savings: $368 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Tennessee. Powered gates add electrical permit requirements.
Outside city limits, Montgomery County is typically the permitting authority.
Get your exact Clarksville price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Clarksville, TN?
Materials typically run $272–$432 for a common-size project using Clarksville-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Clarksville?
DIY materials estimate to about $320. A local contractor estimates to $605–$812 at the Clarksville-area labor rate of roughly $46/hr, so DIY could save an estimated $368 (53%).
Do I need a permit for a gate in Clarksville?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Tennessee. Powered gates add electrical permit requirements. Montgomery County and the City of Clarksville rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Clarksville gate pricing different from the national average?
We apply a regional material cost index for the Clarksville market — currently 6% lower than the national average. Labor is indexed separately at about $46/hr for the contractor comparison.
Other projects in Clarksville
Gate cost in nearby cities
Looking at the whole state? Gate cost in Tennessee.