How much does a gate cost in Chandler, AZ?
Single or double swing gate with anti-sag hardware. Priced against Phoenix, AZ material costs, a typical DIY gate in Chandler runs about $350 in materials — 3% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Chandler cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Chandler (DIY materials) | $298 | $350 | $473 |
| National average | $289 | $340 | $459 |
Priced from the Phoenix, AZ material index — 3% above the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $350. A contractor in the Chandler market (materials plus about 6 labor hours at ~$55/hr) estimates to $662–$888. Estimated DIY savings: $403 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Arizona. Powered gates add electrical permit requirements.
Outside city limits, Maricopa County is typically the permitting authority.
Get your exact Chandler price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a gate cost in Chandler, AZ?
Materials typically run $298–$473 for a common-size project using Chandler-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Chandler?
DIY materials estimate to about $350. A local contractor estimates to $662–$888 at the Chandler-area labor rate of roughly $55/hr, so DIY could save an estimated $403 (53%).
Do I need a permit for a gate in Chandler?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Arizona. Powered gates add electrical permit requirements. Maricopa County and the City of Chandler rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Chandler gate pricing different from the national average?
We apply a regional material cost index for the Chandler market — currently 3% higher than the national average. Labor is indexed separately at about $55/hr for the contractor comparison.
Other projects in Chandler
Gate cost in nearby cities
Looking at the whole state? Gate cost in Arizona.