How much does a gate cost in Atlanta, GA?
Single or double swing gate with anti-sag hardware. Priced against Atlanta, GA material costs, a typical DIY gate in Atlanta runs about $353 in materials, right at the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Atlanta cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Atlanta (DIY materials) | $300 | $353 | $477 |
| National average | $300 | $353 | $477 |
Priced from the Atlanta, GA material index — currently even with the national average. Based on a common-size gate; enter your own dimensions for an exact number.
DIY materials estimate: $353. A contractor in the Atlanta market (materials plus about 6 labor hours at ~$52/hr) estimates to $668–$896. Estimated DIY savings: $406 (53%).
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Georgia. Powered gates add electrical permit requirements.
Outside city limits, Fulton County is typically the permitting authority.
Get your exact Atlanta price
The planner opens pre-filled with the same typical gate behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
How much does a gate cost in Atlanta, GA?
Materials typically run $300–$477 for a common-size project using Atlanta-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Atlanta?
DIY materials estimate to about $353. A local contractor estimates to $668–$896 at the Atlanta-area labor rate of roughly $52/hr, so DIY could save an estimated $406 (53%).
Do I need a permit for a gate in Atlanta?
Gates follow the same height limits as the fence they sit in — 6 ft back/side and 4 ft front is typical in Georgia. Powered gates add electrical permit requirements. Fulton County and the City of Atlanta rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Atlanta gate pricing different from the national average?
We apply a regional material cost index for the Atlanta market, which currently sits at the national average. Labor is indexed separately at about $52/hr for the contractor comparison.
Other projects in Atlanta
Gate cost in nearby cities
Looking at the whole state? Gate cost in Georgia.