How much does a wall framing cost in Des Moines, IA?
Stud-by-stud wall takeoff with plates, headers and openings. Priced against Iowa material costs, a typical DIY wall framing in Des Moines runs about $688 in materials — 6% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Des Moines cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Des Moines (DIY materials) | $585 | $688 | $929 |
| National average | $622 | $732 | $988 |
Priced from the Iowa material index — 6% below the national average. Based on a common-size wall framing; enter your own dimensions for an exact number.
DIY materials estimate: $688. A contractor in the Des Moines market (materials plus about 18 labor hours at ~$49/hr) estimates to $1,544–$2,070. Estimated DIY savings: $1,066 (61%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Polk County is typically the permitting authority.
Get your exact Des Moines price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a wall framing cost in Des Moines, IA?
Materials typically run $585–$929 for a common-size project using Des Moines-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Des Moines?
DIY materials estimate to about $688. A local contractor estimates to $1,544–$2,070 at the Des Moines-area labor rate of roughly $49/hr, so DIY could save an estimated $1,066 (61%).
Do I need a permit for a wall framing in Des Moines?
Permit thresholds vary by project. Check with the local building department before you start. Polk County and the City of Des Moines rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Des Moines wall framing pricing different from the national average?
We apply a regional material cost index for the Des Moines market — currently 6% lower than the national average. Labor is indexed separately at about $49/hr for the contractor comparison.
Other projects in Des Moines
Wall framing cost in nearby cities
Looking at the whole state? Wall framing cost in Iowa.