How much does a wall framing cost in Albuquerque, NM?
Stud-by-stud wall takeoff with plates, headers and openings. Priced against New Mexico material costs, a typical DIY wall framing in Albuquerque runs about $683 in materials — 2% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Albuquerque cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Albuquerque (DIY materials) | $581 | $683 | $922 |
| National average | $592 | $697 | $941 |
Priced from the New Mexico material index — 2% below the national average. Based on a common-size wall framing; enter your own dimensions for an exact number.
DIY materials estimate: $683. A contractor in the Albuquerque market (materials plus about 19 labor hours at ~$47/hr) estimates to $1,533–$2,055. Estimated DIY savings: $1,059 (61%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Bernalillo County is typically the permitting authority.
Get your exact Albuquerque price
The planner opens pre-filled with the same typical wall framing behind the numbers above — change any answer to match your build and the price updates instantly.
Frequently asked questions
How much does a wall framing cost in Albuquerque, NM?
Materials typically run $581–$922 for a common-size project using Albuquerque-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Albuquerque?
DIY materials estimate to about $683. A local contractor estimates to $1,533–$2,055 at the Albuquerque-area labor rate of roughly $47/hr, so DIY could save an estimated $1,059 (61%).
Do I need a permit for a wall framing in Albuquerque?
Permit thresholds vary by project. Check with the local building department before you start. Bernalillo County and the City of Albuquerque rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Albuquerque wall framing pricing different from the national average?
We apply a regional material cost index for the Albuquerque market — currently 2% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Albuquerque
Wall framing cost in nearby cities
Looking at the whole state? Wall framing cost in New Mexico.