How much does a concrete flatwork cost in Washington, DC?
Driveways, walks, aprons and steps with joints and finish. Priced against Washington, DC material costs, a typical DIY concrete flatwork in Washington runs about $3,504 in materials — 22% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Washington cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Washington (DIY materials) | $2,978 | $3,504 | $4,730 |
| National average | $2,441 | $2,872 | $3,877 |
Priced from the Washington, DC material index — 22% above the national average. Based on a common-size concrete flatwork; enter your own dimensions for an exact number.
DIY materials estimate: $3,504. A contractor in the Washington market (materials plus about 66 labor hours at ~$82/hr) estimates to $8,634–$11,577. Estimated DIY savings: $6,307 (64%).
Permit thresholds vary by project. Check with the local building department before you start.
Get your exact Washington price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a concrete flatwork cost in Washington, DC?
Materials typically run $2,978–$4,730 for a common-size project using Washington-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Washington?
DIY materials estimate to about $3,504. A local contractor estimates to $8,634–$11,577 at the Washington-area labor rate of roughly $82/hr, so DIY could save an estimated $6,307 (64%).
Do I need a permit for a concrete flatwork in Washington?
Permit thresholds vary by project. Check with the local building department before you start. City of Washington rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Washington concrete flatwork pricing different from the national average?
We apply a regional material cost index for the Washington market — currently 22% higher than the national average. Labor is indexed separately at about $82/hr for the contractor comparison.
Other projects in Washington
Concrete flatwork cost in nearby cities
Looking at the whole state? Concrete flatwork cost in District of Columbia.