How much does a concrete flatwork cost in Tacoma, WA?
Driveways, walks, aprons and steps with joints and finish. Priced against Washington material costs, a typical DIY concrete flatwork in Tacoma runs about $3,131 in materials — 9% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Tacoma cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Tacoma (DIY materials) | $2,661 | $3,131 | $4,227 |
| National average | $2,441 | $2,872 | $3,877 |
Priced from the Washington material index — 9% above the national average. Based on a common-size concrete flatwork; enter your own dimensions for an exact number.
DIY materials estimate: $3,131. A contractor in the Tacoma market (materials plus about 74 labor hours at ~$66/hr) estimates to $7,715–$10,345. Estimated DIY savings: $5,636 (64%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Pierce County is typically the permitting authority.
Get your exact Tacoma price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a concrete flatwork cost in Tacoma, WA?
Materials typically run $2,661–$4,227 for a common-size project using Tacoma-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Tacoma?
DIY materials estimate to about $3,131. A local contractor estimates to $7,715–$10,345 at the Tacoma-area labor rate of roughly $66/hr, so DIY could save an estimated $5,636 (64%).
Do I need a permit for a concrete flatwork in Tacoma?
Permit thresholds vary by project. Check with the local building department before you start. Pierce County and the City of Tacoma rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Tacoma concrete flatwork pricing different from the national average?
We apply a regional material cost index for the Tacoma market — currently 9% higher than the national average. Labor is indexed separately at about $66/hr for the contractor comparison.
Other projects in Tacoma
Concrete flatwork cost in nearby cities
Looking at the whole state? Concrete flatwork cost in Washington.