How much does a concrete flatwork cost in Durham, NC?
Driveways, walks, aprons and steps with joints and finish. Priced against North Carolina material costs, a typical DIY concrete flatwork in Durham runs about $2,757 in materials — 4% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Durham cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Durham (DIY materials) | $2,343 | $2,757 | $3,722 |
| National average | $2,441 | $2,872 | $3,877 |
Priced from the North Carolina material index — 4% below the national average. Based on a common-size concrete flatwork; enter your own dimensions for an exact number.
DIY materials estimate: $2,757. A contractor in the Durham market (materials plus about 91 labor hours at ~$47/hr) estimates to $6,793–$9,109. Estimated DIY savings: $4,963 (64%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Durham County is typically the permitting authority.
Get your exact Durham price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a concrete flatwork cost in Durham, NC?
Materials typically run $2,343–$3,722 for a common-size project using Durham-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Durham?
DIY materials estimate to about $2,757. A local contractor estimates to $6,793–$9,109 at the Durham-area labor rate of roughly $47/hr, so DIY could save an estimated $4,963 (64%).
Do I need a permit for a concrete flatwork in Durham?
Permit thresholds vary by project. Check with the local building department before you start. Durham County and the City of Durham rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Durham concrete flatwork pricing different from the national average?
We apply a regional material cost index for the Durham market — currently 4% lower than the national average. Labor is indexed separately at about $47/hr for the contractor comparison.
Other projects in Durham
Concrete flatwork cost in nearby cities
Looking at the whole state? Concrete flatwork cost in North Carolina.